CAPCHEM

Global electronic chemical products supplier

Lithium-ion batteries

Lithium-ion batteries is also named secondary lithium batteries,the mechanism of which is the Li+ shuttle reversibly between the anode and cathode. During charge,Lithium discharge from the cathode become Li+ and pass through the electrolyte to the anode,then the anode become lithium rich state;During discharge, the opposition become.our company’s lithium-ion electrolyte products include 3C comsumer electronics and EVs & energy storage, the advantage of 3C electrolyte is high energy density and high power,the excellence of EVs & energy storage is long cycle times and high safety. 


Electrolyte for portable electronics

Electrolyte for normal LiCoO2(4.2V)

This products are designed for prismatic or pouch cell using LiCoO2 as cathode material and artificial graphite or modified nature graphite as anode material.these series is include LBC305-01,LBC322-01,LBC3068G2,etc.

Electrolyte for high voltage LiCoO2(4.35V&4.4V)

This products are designed for prismatic or pouch cell using 4.35V&4.4V modified LiCoO2 as cathode material and artificial graphite or modified nature graphite as anode material.the series of electrolyte use special additives which could suppress the dissolution of M from the cathode lattice, conbined with other functional additives,these electrolyte have excellent performance.these series is include LBC3045D7,LBC3045M46,LBC3045M56,etc.

Electrolyte for Ni-rich cathode

This products are designed for prismatic cell using Ni-rich cathode material and artificial graphite or modified nature graphite as anode material.it has special additive which could suppress the reaction between Ni-rich materials and the electrolyte.the main product is LBC3033.

Electrolyte for compacted graphite

This products are designed for pouchl cell using high compacted LiCoO2 (≥4.0g/cm3)as cathode material and modified nature graphite(compacted density≥1.68g/cm3) as anode material.these electrolyte use low viscosity solvents as cosolvents to solve the problem of permeability,which could ensure no lithium metal deposition on the anode surface in the early cycles.these products include LBC3707F,LBC315T9,etc.

Electrolyte for silicon-based anode

This products are designed for pouch cell using LiCoO2 as cathode material and Si/C as anode material. These electrolyte have special additives which could form flexiable SEI film on anode,these will heip to promote the cycles performance.the main products is LBC3401A4.

Electrolyte for cyclinder cell using LiCoO2 as cathode

This products are designed for cylinder cell using LiCoO2 as cathode material and artificial graphite or modified nature graphite as anode material.these electrolyte include LBC3224,LBC3045U1,etc.

Electrolyte for cyclinder cell using LiNixCoyMn1-x-yO2 as cathode

This products are designed for cylinder cell using LiNixCoyMn1-x-yO2 as cathode material and artificial graphite as anode material.the main product is LBC3036.


Electrolyte for miniature power unit

Electrolyte for high power pouch cell using LiCoO2 as cathode

This products are designed for high power cell using LiCoO2 as cathode material and artificial graphite as anode material. These electrolyte include LBC3018B-01,etc.

Electrolyte for high power cyclinder cell using LiNixCoyMn1-x-yO2 as cathode

This products are designed for high power cyclinder cell using NMC as cathode material and artificial graphite as anode material.the main product is LBC3021C7,LBC3019C1,etc.

Electrolyte for ultra high power pouch cell

This products are designed for high power cell using LiCoO2 or LiNixCoyMn1-x-yO2 as cathode material and artificial graphite as anode material.the discharge rate is higher than 40C.these products include LBC316A6,etc.

Electrolyte for Evs and energy storage

Electrolyte for high capacity prismatic cell using LiFePO4 as cathode

This products are designed for prismatic cell using LiFePO4 as cathode material and artificial graphite as anode material.these series include LBC3237B,etc.

Electrolyte for high capacity cyclinder cell using LiFePO4 as cathode

This products are designed for cyclinder cell using LiFePO4 as cathode material and artificial graphite as anode material.the main product is LBC3226F.


Electrolyte for high power cell using LiFePO4 as cathode

This products are designed for high power cell using LiFePO4 as cathode material and artificial graphite as anode material.these series include LBC3229B,LBC3229H4,etc.

Electrolyte for LiFePO4 power sources which used in low temperature

This products are designed for LiFePO4 power sources which  is used in low temperature.the main product is LBC3215C.

Electrolyte for LiFePO4 power sources which used in high temperature

This products are designed for LiFePO4 power sources which  is used in high temperature.the main product is LBC3237BK

Electrolyte for power sources which used LiNixCoyMn1-x-yO2 as cathode

This products are designed for power sources which is used LiNixCoyMn1-x-yO2 as cathode.the main product is LBC3038C4.

Electrolyte for power sources which used LiMn2O4 as cathode

This products are designed for high capacity power sources which used LiMn2O4 as cathode.the main product is LBC3211F4.

Electrolyte for special functions

Electrolyte for ultra low temperature

This products are designed for batteries which will used in ultra low temperature,especially in military or aerospace,normally the cathode is LiCoO2.The main product is LBC3707D.


Electrolyte for electronic cigarette

This products are designed for electronic cigarette which will need high diacharge rate,normally the cathode is LiCoO2.the main product is LBC316A6.


In-situ polymerizable electrolyte for gel type polymer cell

This products are designed for gel type polymer cell. the main product is LBC312GA,LBC315GC6,etc.


Non-flammable electrolyte

This product is designed for improving the safety of lithium-ion battery, the main product is LBC3508C.